3 Comments

1. 

   deepak pant

   10th November 2017

   Over 4.5 years Experience in Test & Commissioning/Pre-Commissioning/Maintenance Instrument Engineer. Calibration of large number of instruments as Pressure, Temperature, flow, level and control valves. Looking for a good position in the field of instruments and automation in a prestigious company where previous skills and capabilities can be put to efficient use. I possess effective organizational skills and the ability to supervise a team and develop the final output.

   Summary of Skills .

    Instrumentation and control systems engineer in detailed maintenance, commissioning and development co-ordination of instruments and control systems in Oil and gas field, Desalination Polymer Plant/chemicals projects
    Configuring and faults diagnosis of DCS(yokogawa), PLC(AB), SCADA, RTU, HART Communication Analyzers and Control Loops

    Confidant With calibration of pressure, temperature flow, level transmitter, troubleshooting skills
    Proficient in the installation & commissioning or pre-commissioning & maintenance of a wide range of instruments equipments with sound knowledge of instrumentation technologies
    Excellent team building & troubleshooting skills with proven abilities maintenance
    Various range of transmitter calibration with various manufacturing company (Rosemount, Honeywell Yokogava, Siemen’s, ABB, Bently Nevada,)
    Proficient in the Pressure, Temperature, Level, Flow transmitter, Control Valve & Gauge Level Switch, pig indicator, knife valve calibration process
    A strategic Pre-Commissioning with expertise in well Commissioning & Handover, F&G, Water Injection Pump, Export Oil Pump, Deluge Water System, Worked With GE & Bently Nevada Sensors/Transducers And Hot Loop Of Transmitters
    Temperature controller(Honeywell,Fuji,Radix,) configuration and settings

   CAREER CONTOUR

   Merino Industries Limited is a versatile manufacturer and marketer of Interiors Solutions, India’s largest manufacturer and exporter of Laminates Jan 2017- Current
   Sr.Instrumentation Engineer Location-Dahej, Gujarat

   ________________________________________

   (SACH ELECTRO MECH PVT. LTD. is one of the leading company in MPT Cairn Energy Projects/CAIRN INDIA LTD) –
   June 2013 – Oct 2016
   Instrumentation Engineer (Contract) Location-Barmer, RajasthanS

   Growth Path:
   Jan 2017- Current Sr.Instrument Engineer
   June 2013 – Oct 2016 Instrument Engineer
   (3 years 5 months)

   ________________________________________
   Jan17 – Current Sr.Instrument Engineer
   Project/O&M Merino Industries Limited

    Instrumentation Tag Configuration with RSLogix5000 v20.0
    Factory talk SCADA TAG Representation
    Commissioning of Dryer (PF,MF) Heating Press, Sanding Machine, calibration of instrument (temperature(k-TC/RTD-PT-100), Pressure, control valve, GAP-sensors
    Preparation of documents and reports ,PRQ, INFOR LN
    AutoCAD drawing Review and Editing, Preparation of Test pack for high pressure testing and low pressure testing in pipeline
    Implementation of instrumentation lab/Master instruments selection.
    Instrument Troubleshooting/Calibration in thermic fluid Heater ,Hot water system
    Selection of plant instrument/sensor/master calibrator instrument/cables.
    Preparation/Reviewing of calibration reports/Manage maintenance data/reports
    Project coordination with project team

   ________________________________________
   June 13 – Oct 2016 Instrument Engineer
   (3 years 5 months)
   PROJECTS Cairn India ltd.

   CPF- Central Polymer Facility (India’s first and world’s largest project) .

   India’s first and world’s largest central polymer facility for Enhance Oil Recovery. Worked with ITES
   ……………………………………………………………………………………………………………………………..
   Pre-Commissioning and Maintenance of instruments

   Stage 1- POLYMER POWER UNLOADING Device
   Testing of solenoid valve (Xsv), Calibration of pressure Transmitter (PIT) and flow Transmitter (FIT), and Maintenance of load cells
   —————————————————————————————————————-
   Stage 2- Silo-polymer storage and distribute Unit
   Maintenance of level switch, Testing of level switch, maintenance of knife valve, solenoid valve and
   Calibration of flow transmitter, Negative Pressure Transmitter (NPT) in unloading devices to silo unit
   —————————————————————————————————————
   Stage 3-Maturation tank
   Maintenance of level switch and Level Transmitter, control valve, solenoid valve, Magnetic type flow transmitter Testing of level switch, maintenance of knife valve, solenoid valve and
   Calibration of flow transmitter, Negative Pressure Transmitter (NPT) in silo to Maturation tank unit
   —————————————————————————————————————-
   Stage 4-Dilution tank
   Maintenance of level switch and Level Transmitter, control valve, solenoid valve, Magnetic type flow transmitter Testing of level switch, maintenance of knife valve, solenoid valve and Calibration of flow transmitter & Pressure transmitter and Float type Level transmitter ,Temperature Transmitter(Rtd Pt100) in Maturation tank to Dilution tank unit
   —————————————————————————————————————-

   Stage 5- Booster Pump
   Maintenance of Pressure Transmitter, and solenoid Valve, temperature transmitter, Magnetic type flow meter
   —————————————————————————————————————-

   Utility Package- Air Compressor, Air Dryer, N2 Package, Powder Unloading System, Load Cells, Negative Pressure Transmitter.
   5 NO’s process trains commissioning and Startup, Instruments Testing/Troubleshooting or Maintenance. Booster pumps. All Instruments Calibration And Process Logic Checks.DCS Operations, PAGA systems, process control, mechanical valves,(P&ID)
   ———————————————————————————————————-
   Documentation:-
   Preparation of punch points in polymer plant, liquidation of punch point, startup team support, P&I, Loop Drawing verification
   C&E (Cause and Effect )(interlocks) Checks and verification with DCS

   DCS-YOKOGAVA version Centum vp, graphics check and operator support with production team

   Instrument and transmitter- Maintenance and calibration of transmitters PT, LT, TT, DPT (Emerson Rosemount, Endress & Hauser, ABB ,Honeywell,) and Monitoring vibration transducers

   Devices and protocol-Hart 375 & 475, Druck Pressure calibrator, comparator, temperature calibrator, decade Box, MA Source

   ===========================================================
   Project-Commissioning and Pre-Commissioning, Cairn India Project
   ———————————————————————————————————–
   Flow Line Modification(RGT-Cairn India ltd)

   Commissioning and Pre-commissioning of flow line modification project(shutdown project)
   Loop checks of new installed transmitters and valve(MOV), Calibration of transmitters(PT,FT,TT), logics checks for PST in Shutdown well, calibration of MOV,
   Verification the cause and effect check reading logics
   Vender coordination, testing of choke valve, testing of Flowserve-Mov, calibration of Mov

   Devices and protocol-Hart 375 & 475, Druck Pressure calibrator, comparator, temperature calibrator, decade Box, MA Source

   Documentation- Preparation of ITR’s (Instruments test reports), red line Markup of P&ID, loop drawings and loop folders, calibration report preparation. Punch point list preparation and punch
   point Liquidation

   —————————————————————————————————————–
   MANGALA WELL PAD Commissioning
   ———————————————————————————————————–
   (MPT Site of Cairn)- Loop Check & Cause and Effect (Logics Checks) For Oil Wells, Approx 20 Wells-(Production Injection, Modified Wells, Polymer Injection Wells) Commissioning And Handover Process. Field And DCS- Both Side Commissioning & Testing Of Instruments, Troubleshooting Of Instruments, Successfully Well Handover to Operation. process control, mechanical valves, mechanical support, mechanical drawing (P&ID)

   Export Oil Pumps & Water Injection Pumps (MPT EPC 1) – Pumps Related Projects- Loop Check & Cause And Effect With Vendor Coordination, Work With Ge, Bently Nevada Sensors. process control, mechanical valves, mechanical support, mechanical drawing (P&ID)

   Devices and protocol-Hart 375 & 475, Druck Pressure calibrator, comparator, temperature calibrator, decade Box, MA Source hand pump (700 bar)

   Documentation- Preparation of ITR’s (Instruments test reports), Red line Markup of P&ID, loop drawings and loop folders, calibration report preparation. Punch point list preparation and punch
   point Liquidation

   Calibration Lab In charge –(Wika Scandura Lab)
   ———————————————————————————————————–
   As an in charge of calibration lab:-
   Manage the technician team and trained technician for wika test bench, generate and Preparation of calibration reports,

   Test bench calibration:- Pressure :-Hand Pumps (700 Bar), & Pressure Controller –Cpc600, Pascal 100 (Multifunction Calibrator)_(-10bar to 20 bar) &(0-70bar), Comparator, Hydraulic Dead Weight Tester (70000kpa)

   Test bench calibration:- Flow/Level- Pressure Controller –Cpc600, Pascal 100 (Multifunction Calibrator)

   Test bench calibration:-Temperature- Decade Resistance Box, temperature bath- (0-200 0C).

   Calibration instrument-pressure, flow ,level, temperature, pressure gauge, loop indicator

   Documentation:-Generation of calibration reports, vendor reports review, transmitter configuration regarding client reports

   ________________________________________VENDOR CO-ORDINATION
    Export oil pumps & water injection pumps (G.E Vendor )
    Air compressor (IR Vendor)
    Air Dryer (Siemens Vendor)
    N2 package
    Calibration test report preparation
    Bently Nevada 3500

   ________________________________________RESPONSIBILITIES

    Cold loop & Hot Loop Checks
    Inspection & Punch list generation for the Construction Completed systems
    Cause & Effect checks
    Red Line Mark-up Preparation. Inspection of BOM(Bill Of Material).
    SAT (Site Acceptance Test)/FAT

   ________________________________________
   FUNCTIONAL STRENGTHS

   PROJECTS (PRE-COMMISSIONING)
    Installation & Commissioning
    Troubleshooting of control valve, on/off valve/knife valve
    Site coordination manpower management/punch point
    Testing/ Validation-calibration reports reviews
    Confident with calibration test bench, Pressure Hand Pumps (700 Bar), Temperature Bath, & Pressure Controller –Cpc600, Pascal 100 (Multifunction Calibrator), Comparator, Decade Resistance Box, Hydraulic Dead Weight Tester (70000kpa)
    Confidant with Hart 475, Hart 375, Multimeter, Pressure Calibrator, Druck
    Providing instrumentation facilities through Planning, Engineering, Commissioning
    Supervising the performance of team members and resolving issues faced during execution of projects

   ________________________________________ ADDITIONAL INFORMATION

   Measurement & Control Instruments
    Extensive troubleshooting commissioning or pre-commissioning experience for Smart (HART) Field bus (FF) type field devices of all process variable of various Manufacturer like, Rosemount, Honeywell, Yokogawa, ABB, Etc

    Field Diagnostics Check and Remote calibration by using HART 375 and 475 hand held Communicator, Pascal 100 multi calibrator, Loop Calibrator, pneumatic druck and hydraulic pump (700bar), multi meter
    Testing of control valve, ESD valves, Choke Valves function check.
    Pre-commissioning and functional test of process loop by Interpretation of loop drawing, Instrument cable & termination details, Hook-up drawing, P&ID and cause and effect diagram
    Pre-commissioning fire and gas instruments like smoke detector(SMD,OSD), gas detector, flame detector

   ________________________________________COMPUTER FORTE

    Operating Systems :MS-DOS, WINDOWS 95, 98, 2000, XP,7 & 8
    Tools/ Languages : PCB DESINING (DIPTRESS)/RS LOGIX 5000/SQL
    Other Applications :MS Office (Word, Excel & PowerPoint),
    Concepts :Sound knowledge of computer hardware & Software including installations. Well versed with Internet, Multimedia etc

   ________________________________________PLC/DCS AND SCADA EXPOSURE

   CENTUM VP is Yokogawa’s latest integrated production control system, also known as a distributed control system (DCS)

    Yokogawa’s DCS system
    Graphics checks
    Logics checks
    Operate friendly
    Factory talk SCADA TAG Representation
    Instrumentation Tag Configuration with RSLogix5000 v20.0

   ________________________________________ Educational Qualifications:

   B.Tech in Electronics & Instrumentation Engineering (Graduation)…………………………………… 2013
   3 Years Diploma in Electronics Engineering (Polytechnic)…………………………………………………… 2010

   ________________________________________PERSONAL DOSSIER

   Date of Birth : 10th Sep 1987
   Current Address : Dahej Gujarat
   Permanent Address : Jagdamba colony Pithoragarh,
   Uttarakhand – 262501, [INDIA]
   Passport No. : L 4495417
   Valid up to: 31/07/2023
   Linguistic Abilities : English & Hindi

2. 

   Gagan Shukla

   18th April 2015

   Hello sir, I m b.Tech fresher and have done btech in electronics n telecommunication, if there is any recruitment plz contact me.

3. 

   yash

   23rd January 2015

   I’ve done B.tech in the stream of applied electronics and instrumentation and currently doing automation training. Contact me if there’s any job available.